TC1197 Datasheet, PDF (163/183 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller

TC1197
Electrical Parameters
5.3.9 EBU Timings
V_SS = 0 V;V_DD = 1.5 V ± 5%; V_DDEBU = 2.5 V ± 5% and 3.3 V ± 5%, Class B pins;
T_A = -40 °C to +125 °C; C_L = 35 pF for address/data; C_L = 40pF for the control lines.
5.3.9.1 EBU Asynchronous Timings
For each timing, the accumulated PLL jitter of the programed duration in number of clock
periods must be added separately. Operating conditions apply and C_L = 35 pF.
Table 23 Common timing parameters for all asynchronous timings¹⁾
Parameter
Symbol Limit Values Unit Edge
min max
Setting
Pulse width deviation from the ideal
t_a
programmed width due to the A2 pad
asymmetry, strong driver mode,
rise delay - fall delay. C_L = 35 pF.
AD(31:0) output delay to ADV rising edge, t₁₃
AD(31:0) output delay ^multiplexed
read / write
t₁₄
CC -1 1.5
-2 1
CC -5.5 2
CC -5.5 2
ns sharp
medium
–
–
1) Not subject to production test, verified by design/characterization.
Data Sheet
159
V1.1, 2009-05