TC1197 Datasheet, PDF (122/183 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller

TC1197
Pinning
Table 4
Pin Definitions and Functions (BGA-416 Package) (cont’d)
Pin Symbol
Ctrl. Type Function
U10, V_SS
U11,
U12,
U13,
U14,
U15,
U16,
U17
-
-
Digital Ground (center balls cont’d)
1) This pin is also connected to the analog power supply for comparator of the ADC module.
Legend for Table 4
Column “Ctrl.”:
I = Input (for GPIO port Lines with IOCR bit field Selection PCx = 0XXX_B)
O = Output
O0 = Output with IOCR bit field selection PCx = 1X00_B
O1 = Output with IOCR bit field selection PCx = 1X01_B (ALT1)
O2 = Output with IOCR bit field selection PCx = 1X10_B (ALT2)
O3 = Output with IOCR bit field selection PCx = 1X11_B (ALT3)
Column “Type”:
A1 = Pad class A1 (LVTTL)
A2 = Pad class A2 (LVTTL)
F = Pad class F (LVDS/CMOS)
D = Pad class D (ADC)
PU = with pull-up device connected during reset (PORST = 0)
PD = with pull-down device connected during reset (PORST = 0)
TR = tri-state during reset (PORST = 0)
3.1.2 Pull-Up/Pull-Down Reset Behavior of the Pins
Table 5
List of Pull-Up/Pull-Down Reset Behavior of the Pins
Pins
PORST = 0
PORST = 1
all GPIOs, TDI, TESTMODE
Pull-up
PORST, TRST, TCK, TMS
Pull-down
Data Sheet
118
V1.1, 2009-05