90E36 Datasheet, PDF (45/79 Pages) Integrated Device Technology – Poly-Phase High-Performance Wide-Span Energy Metering IC

90E36
POLY-PHASE HIGH-PERFORMANCE WIDE-SPAN ENERGY METERING IC
FuncEn1
Function Enable 1
Address: 04H
Type: Read/Write
Default Value: 0000H
Bit
Name
15
INOv1En
14
13-12
11
INOv0En
-
THDUOvEn
10
THDIOvEn
9
DFTDone
8
-
7
RevQchgTEn
6
RevQchgAEn
5
RevQchgBEn
4
RevQchgCEn
3
RevPchgTEn
2
RevPchgAEn
1
RevPchgBEn
0
RevPchgCEn
Description
This bit determines whether to enable the interrupt when the INOv1 bit (b15, SysStatus1) is set.
0: disable (default)
1: enable
This bit determines whether to enable the interrupt when the INOv0 bit (b14, SysStatus1) is set.
0: disable (default)
1: enable
Reserved.
This bit determines whether to enable the interrupt when the THDUOv bit (b11, SysStatus1) is set.
0: disable (default)
1: enable
This bit determines whether to enable the interrupt when the THDIOv bit (b10, SysStatus1) is set.
0: disable (default)
1: enable
This bit determines whether to enable the interrupt when the DFTDone bit (b9, SysStatus1) is set.
0: disable (default)
1: enable
Reserved.
These bits determine whether to enable the corresponding interrupt when any of the direction change bits (b7~b0, SysStatus1) is
set.
0: disable (default)
1: enable
Register
45
December 9, 2011