7133LA70GB Datasheet, PDF (4/16 Pages) Integrated Device Technology – HIGH SPEED 2K X 16 DUAL-PORT SRAM

IDT7133SA/LA, IDT7143SA/LA
High-Speed 2K x 16 Dual-Port RAM
Military, Industrial and Commercial Temperature Ranges
Absolute Maximum Ratings⁽¹⁾
Maximum Operating
Symbol
Rating
Commercial Military Unit ^{Temperature and Supply Voltage(1,2)}
& Industrial
Grade
Ambient
GND
Vcc
VTERM⁽²⁾ Terminal Voltage
-0.5 to +7.0 -0.5 to +7.0 V
Temperature
with Respect
to GND
Military
-55^OC to +125^OC
0V
5.0V + 10%
TBIAS
TSTG
PT⁽³⁾
Temperature
Under Bias
Storage
Temperature
Power
Dissipation
-55 to +125 -65 to +135 ^oC
Commercial
0^OC to +70^OC
0V
5.0V + 10%
Industrial
-40^OC to +85^OC
0V
5.0V + 10%
-65 to +150 -65 to +150 ^oC
NOTES:
2746 tbl 04
2.0
2.0
W
1. This is the parameter TA. This is the "instant on" case temperature.
IOUT
DC Output
Current
50
50
mA
NOTES:
2746 tbl 02 _{Recommended DC Operating}
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may Conditions
cause permanent damage to the device. This is a stress rating only and functional
operation of the device at these or any other conditions above those indicated in Symbol
Parameter
Min. Typ. Max. Unit
the operational sections of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect reliability.
VCC Supply Voltage
4.5 5.0 5.5 V
2. VTERM must not exceed Vcc + 10% for more than 25% of the cycle time or 10ns
maximum, and is limited to < 20mA for the period of VTERM > Vcc + 10%.
GND Ground
0
0
0V
VIH Input High Voltage
2.2
____
6.0⁽²⁾
V
VIL Input Low Voltage
-0.5⁽¹⁾
____
0.8
V
Capacitance (TA = +25°C, f = 1.0mhz)
Symbol
Parameter⁽¹⁾
Conditions⁽²⁾ Max. Unit
NOTES:
1. VIL (min.) = -1.5V for pulse width less than 10ns.
2. VTERM must not exceed Vcc + 10%.
2746 tbl 05
CIN Input Capacitance
VIN = 3dV
11 pF
COUT Output Capacitance
VOUT = 3dV
11 pF
NOTES:
2746 tbl 03
1. This parameter is determined by device characterization but is not production
tested.
2. 3dV references the interpolated capacitance when the input and output switch from
0V to 3V or from 3V to 0V.
DC Electrical Characteristics Over the Operating
Temperature and Supply Voltage Range (Either port, VCC = 5.0V ± 10%)
7133SA
7143SA
7133LA
7143LA
Symbol
Parameter
Test Conditions
Min.
Max.
Min.
Max.
|ILI|
Input Leakage Current⁽¹⁾
VCC = 5.5V, VIN = 0V to VCC
___
10
___
5
|ILO|
Output Leakage Current
CE = VIH, VOUT = 0V to VCC
___
10
___
5
VOL
Output Low Voltage (I/O0-I/O15)
IOL = 4mA
___
0.4
___
0.4
VOL
Open Drain Output Low Voltage
(BUSY)
IOL = 16mA
___
0.5
___
0.5
VOH
Output High Voltage
IOH = -4mA
2.4
___
2.4
___
NOTE:
1. At Vcc < 2.0V, input leakages are undefined.
Unit
µA
µA
V
V
V
2746 tbl 06
6.442