HY5S7B6LF-H Datasheet, PDF (30/51 Pages) Hynix Semiconductor – 512MBit MOBILE SDR SDRAMs based on 8M x 4Bank x16I/O

11
512Mbit (32Mx16bit) Mobile SDR Memory
HY5S7B6LF(P) Series
READ BURST TERMINATE
Data from any READ burst may be truncated with a BURST TERMINATE command. The BURST TERMINATE latency is
equal to the read (CAS) latency, i.e., the BURST TERMINATE command should be issued X cycles after the READ com-
mand where X equals the desired data-out element.
CLK
Command
READ
BURST
Address
DQ
DQ
BA, Col
n
CL =2
Don
CL =3
Don'
Don
Don'
1) Don : Data out from column n
2) BA, Col n = Bank A, Column n
3) Cases shown are bursts of 4, 8, or full page terminated after 2 data elements
Don't Care
Terminating a Read Burst
Rev 1.0 / Jan. 2007
30