K52P144M100SF2V2 Datasheet, PDF (39/80 Pages) Freescale Semiconductor, Inc – K52 Sub-Family

Peripheral operating requirements and behaviors
Table 27. 16-bit ADC operating conditions (continued)
Symbol
C_rate
Description
ADC conversion
rate
Conditions
16 bit modes
No ADC hardware averaging
Continuous conversions
enabled, subsequent
conversion time
Min.
37.037
Typ.¹
Max.
Unit
—
461.467
Ksps
Notes
5
1. Typical values assume V_DDA = 3.0 V, Temp = 25°C, f_ADCK = 1.0 MHz unless otherwise stated. Typical values are for
reference only and are not tested in production.
2. DC potential difference.
3. This resistance is external to MCU. The analog source resistance should be kept as low as possible in order to achieve the
best results. The results in this datasheet were derived from a system which has <8 Ω analog source resistance. The R_AS/
C_AS time constant should be kept to <1ns.
4. To use the maximum ADC conversion clock frequency, the ADHSC bit should be set and the ADLPC bit should be clear.
5. For guidelines and examples of conversion rate calculation, download the ADC calculator tool: http://cache.freescale.com/
files/soft_dev_tools/software/app_software/converters/ADC_CALCULATOR_CNV.zip?fpsp=1
Z_AS
R_AS
SIMPLIFIED
INPUT PIN EQUIVALENT
CIRCUIT
Pad
leakage
due to
input
protection
Z_ADIN
SIMPLIFIED
CHANNEL SELECT
CIRCUIT
R_ADIN
ADC SAR
ENGINE
V_ADIN
V_AS
C_AS
INPUT PIN
INPUT PIN
INPUT PIN
R_ADIN
R_ADIN
R_ADIN
C_ADIN
Figure 12. ADC input impedance equivalency diagram
6.6.1.2 16-bit ADC electrical characteristics
Table 28. 16-bit ADC characteristics (V_REFH = V_DDA, V_REFL = V_SSA)
Symbol Description
I_{DDA_ADC} Supply current
Conditions¹
Min.
Typ.²
Max.
Unit
0.215
—
1.7
mA
Table continues on the next page...
Notes
3
K52 Sub-Family Data Sheet, Rev. 1, 6/2012.
Freescale Semiconductor, Inc.
Preliminary
39
General Business Information