K30P121M100SF2V2 Datasheet, PDF (28/67 Pages) Freescale Semiconductor, Inc – K30 Sub-Family

Peripheral operating requirements and behaviors
Table 16. Oscillator DC electrical specifications (continued)
Symbol
I_DDOSC
Description
Supply current — high gain mode (HGO=1)
• 32 kHz
• 4 MHz
• 8 MHz (RANGE=01)
• 16 MHz
• 24 MHz
• 32 MHz
Min.
Typ.
Max.
Unit
—
25
—
μA
—
400
—
μA
—
500
—
μA
—
2.5
—
mA
—
3
—
mA
—
4
—
mA
C_x
EXTAL load capacitance
—
—
—
C_y
XTAL load capacitance
—
—
—
R_F
Feedback resistor — low-frequency, low-power
—
—
—
MΩ
mode (HGO=0)
Feedback resistor — low-frequency, high-gain
—
10
—
MΩ
mode (HGO=1)
Feedback resistor — high-frequency, low-power
—
—
—
MΩ
mode (HGO=0)
Feedback resistor — high-frequency, high-gain
—
1
—
MΩ
mode (HGO=1)
R_S
Series resistor — low-frequency, low-power
mode (HGO=0)
—
—
—
kΩ
Series resistor — low-frequency, high-gain mode
—
200
—
kΩ
(HGO=1)
Series resistor — high-frequency, low-power
mode (HGO=0)
—
—
—
kΩ
Series resistor — high-frequency, high-gain
mode (HGO=1)
—
0
—
kΩ
V_pp5 ^{Peak-to-peak amplitude of oscillation (oscillator}
—
0.6
—
V
mode) — low-frequency, low-power mode
(HGO=0)
Peak-to-peak amplitude of oscillation (oscillator
—
V_DD
—
V
mode) — low-frequency, high-gain mode
(HGO=1)
Peak-to-peak amplitude of oscillation (oscillator
—
0.6
—
V
mode) — high-frequency, low-power mode
(HGO=0)
Peak-to-peak amplitude of oscillation (oscillator
—
V_DD
—
V
mode) — high-frequency, high-gain mode
(HGO=1)
Notes
1
2, 3
2, 3
2, 4
1. V_DD=3.3 V, Temperature =25 °C
2. See crystal or resonator manufacturer's recommendation
3. C_x,C_y can be provided by using either the integrated capacitors or by using external components.
4. When low power mode is selected, R_F is integrated and must not be attached externally.
5. The EXTAL and XTAL pins should only be connected to required oscillator components and must not be connected to any
other devices.
K30 Sub-Family Data Sheet, Rev. 1, 6/2012.
28
Preliminary
Freescale Semiconductor, Inc.
General Business Information