K20P144M120SF3_1210 Datasheet, PDF (18/86 Pages) Freescale Semiconductor, Inc – K20 Sub-Family

General
5.2.5.1 Diagram: Typical IDD_RUN operating behavior
The following data was measured under these conditions:
• MCG in FBE mode for 50 MHz and lower frequencies. MCG in FEE mode at greater
than 50 MHz frequencies. MCG in PEE mode is greater than 100 MHz frequencies.
• USB regulator disabled
• No GPIOs toggled
• Code execution from flash with cache enabled
• For the ALLOFF curve, all peripheral clocks are disabled except FTFL
Figure 2. Run mode supply current vs. core frequency
K20 Sub-Family Data Sheet, Rev. 4, 10/2012.
18
Freescale Semiconductor, Inc.