K20P48M50SF0 Datasheet, PDF (16/60 Pages) Freescale Semiconductor, Inc – K20 Sub-Family

General
Table 6. Power consumption operating behaviors (continued)
Symbol Description
Min.
Typ.
Max.
Unit
I_{DD_VLLS0} Very low-leakage stop mode 0 current at 3.0 V
with POR detect circuit disabled
• @ –40 to 25°C
—
0.176
0.859
μA
• @ 70°C
—
2.2
13.1
μA
• @ 105°C
—
13
23.9
μA
Notes
I_{DD_VBAT} Average current with RTC and 32kHz disabled at
3.0 V
• @ –40 to 25°C
• @ 70°C
• @ 105°C
—
0.19
0.22
μA
—
0.49
0.64
μA
—
2.2
3.2
μA
I_{DD_VBAT} Average current when CPU is not accessing
9
RTC registers
• @ 1.8V
• @ –40 to 25°C
• @ 70°C
• @ 105°C
• @ 3.0V
—
0.57
0.67
μA
—
0.90
1.2
μA
—
2.4
3.5
μA
• @ –40 to 25°C
• @ 70°C
• @ 105°C
—
0.67
0.94
μA
—
1.0
1.4
μA
—
2.7
3.9
μA
1. The analog supply current is the sum of the active or disabled current for each of the analog modules on the device. See
each module's specification for its supply current.
2. 50MHz core and system clock, 25MHz bus clock, and 25MHz flash clock . MCG configured for FEI mode. All peripheral
clocks disabled.
3. 50MHz core and system clock, 25MHz bus clock, and 25MHz flash clock. MCG configured for FEI mode. All peripheral
clocks enabled, and peripherals are in active operation.
4. Max values are measured with CPU executing DSP instructions
5. 25MHz core and system clock, 25MHz bus clock, and 12.5MHz flash clock. MCG configured for FEI mode.
6. 4 MHz core, system, and bus clock and 1MHz flash clock. MCG configured for BLPE mode. All peripheral clocks disabled.
Code executing from flash.
7. 4 MHz core, system, and bus clock and 1MHz flash clock. MCG configured for BLPE mode. All peripheral clocks enabled
but peripherals are not in active operation. Code executing from flash.
8. 4 MHz core, system, and bus clock and 1MHz flash clock. MCG configured for BLPE mode. All peripheral clocks disabled.
9. Includes 32kHz oscillator current and RTC operation.
5.2.5.1 Diagram: Typical IDD_RUN operating behavior
The following data was measured under these conditions:
• MCG in FBE mode
• USB regulator disabled
• No GPIOs toggled
K20 Sub-Family Data Sheet, Rev. 4 5/2012.
16
Freescale Semiconductor, Inc.