XRT75R03D_06 Datasheet, PDF (86/135 Pages) Exar Corporation – EXAR DATA SHEET FORMAT TEMPLATES

XRT75R03D
THREE CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCRONIZER
REV. 1.0.4
BIT NUMBER
4
NAME
RLB_n
3
LLB_n
2
E3_n
TYPE
R/W
DEFAULT
VALUE
DESCRIPTION
0 Loop-Back Select - RLB Bit - Channel_n:
This READ/WRITE bit-field along with the corresponding
LLB_n bit-field is used to configure a given channel (within
the XRT75R03D) into various loop-back modes.
The relationship between the settings for this input pin, the
corresponding LLB_n bit-field and the resulting Loop-back
Mode is presented below.
LLB_n
0
0
1
1
RLB_n
0
1
0
1
Loop-back Mode
Normal (No Loop-back) Mode
Remote Loop-back Mode
Analog Local Loop-back Mode
Digital Local Loop-back Mode
R/W
0 Loop-Back Select - LLB Bit-field - Channel_n:
Please see the description (above) for RLB_n.
R/W
0 E3 Mode Select - Channel_n:
This READ/WRITE bit-field, along with Bit 1 (STS-1/DS3_n)
within this particular register, is used to configure a given
channel (of the XRT75R03D) into either the DS3, E3 or
STS-1 Modes, as depicted below.
0 - Configures Channel_n to operate in either the DS3 or
STS-1 Modes, depending upon the state of Bit 1 (STS-1/
DS3_n) within this same register.
1- Configures Channel_n to operate in the E3 Mode.
82