20-101-1051 Datasheet, PDF (9/165 Pages) List of Unclassifed Manufacturers – C-Programmable Core Module with NAND Flash Mass Storage and Ethernet

Table 1 below summarizes the main features of the RCM3365 and the RCM3375 modules.
Table 1. RCM3365/RCM3375 Features
Feature
RCM3365
RCM3375
Microprocessor
Rabbit 3000 running at 44.2 MHz
SRAM
512K program (fast SRAM) + 512K data
Flash Memory
(program)
512K
Flash Memory
(mass data
storage)
32MB (fixed)^* +
up to 128MB (removable)
(NAND flash)
up to 128MB (removable)
(NAND flash)
Serial Ports
6 shared high-speed, 3.3 V CMOS-compatible ports:
• all 6 are configurable as asynchronous serial ports;
• 4 are configurable as a clocked serial port (SPI) and 1 is
configurable as an HDLC serial port;
• option for second HDLC serial port at the expense of 2
clocked serial ports (SPI)
* RCM3365 modules sold before 2008 had 16MB fixed NAND flash
memory.
NOTE: M-type xD-Picture Cards are not supported at this time.
The RCM3365 and RCM3375 are programmed over a standard PC serial port through a
serial programming cable supplied with the Development Kit, and can also be programed
through a USB port with an RS-232/USB converter, or directly over an Ethernet link using
the Dynamic C download manager with or without a RabbitLink; Dynamic C RabbitSys
may also be used with a RabbitSys-enabled RCM3365 over an Ethernet link.
Appendix A provides detailed specifications for the RCM3365 and the RCM3375.
User’s Manual
3