20-101-1051 Datasheet, PDF (13/165 Pages) List of Unclassifed Manufacturers – C-Programmable Core Module with NAND Flash Mass Storage and Ethernet

1.4.2 Software
The RCM3365 and the RCM3375 are programmed using version 9.24 or later of Dynamic C.
A compatible version is included on the Development Kit CD-ROM.
Rabbit is also offering RCM3365 RabbitCore modules preloaded with Dynamic C Rabbit-
Sys firmware to allow these modules to run Dynamic C RabbitSys. Dynamic C RabbitSys
requires Dynamic C version 9.30 or later, and allows the RCM3365 to be accessed via an
Ethernet connection for remote application updates, and for remote monitoring and con-
trol. A RabbitSys Development Kit is available with all the hardware and software tools
that are needed to develop a RabbitSys application.
Dynamic C v. 9.60 includes the popular µC/OS-II real-time operating system, point-to-
point protocol (PPP), FAT file system, RabbitWeb, and other select libraries that were
previously sold as individual Dynamic C modules.
Rabbit also offers for purchase the Rabbit Embedded Security Pack featuring the Secure
Sockets Layer (SSL) and a specific Advanced Encryption Standard (AES) library. In addi-
tion to the Web-based technical support included at no extra charge, a one-year telephone-
based technical support subscription is also available for purchase. Visit our Web site at
www.rabbit.com for further information and complete documentation, or contact your
Rabbit sales representative or authorized distributor.
NOTE: Version 2.10 or later of the Dynamic C FAT file system module is required to use
the FAT file system with the RCM3365 and RCM3375 models.
1.4.3 Accessories
Rabbit has available a USB Removable Memory Card Reader and a Connector Adapter
Board.
• USB Removable Memory Card Reader (Part No. 20-101-1104)—allows you to read
data from the xD-Picture Card via your PC.
• Connector Adapter Board (Part No. 151-0114)—allows you to plug the RCM3365/
RCM3375 whose headers have a 2 mm pitch into header sockets with a 0.1" pitch.
Visit our Web site at www.rabbit.com or contact your Rabbit sales representative or autho-
rized distributor for further information.
1.4.4 Online Documentation
The online documentation is installed along with Dynamic C, and an icon for the docu-
mentation menu is placed on the workstation’s desktop. Double-click this icon to reach the
menu. If the icon is missing, use your browser to find and load default.htm in the docs
folder, found in the Dynamic C installation folder.
The latest versions of all documents are always available for free, unregistered download
from our Web sites as well.
User’s Manual
7