20-101-1051 Datasheet, PDF (49/165 Pages) List of Unclassifed Manufacturers – C-Programmable Core Module with NAND Flash Mass Storage and Ethernet

5.1.1 Developing Programs Remotely with Dynamic C
Dynamic C is an integrated development environment that allows you to edit, compile,
and debug your programs. Dynamic C has the ability to allow programming over the
Internet or local Ethernet. This is accomplished in one of three ways.
1. RCM3365 RabbitCore modules that are preloaded with Dynamic C RabbitSys firm-
ware can be used with Dynamic C RabbitSys to be accessed via an Ethernet connection
for remote application updates, and for remote monitoring and control. Dynamic C
RabbitSys requires Dynamic C version 9.30 or later, and allows the RCM3365. The
Dynamic C RabbitSys User’s Manual provides complete information on RabbitSys.
2. Via the Rabbit RabbitLink, which allows a Rabbit-based target to have programs down-
loaded to it and debugged with the same ease as exists when the target is connected
directly to a PC.
3. Dynamic C provides sample programs to illustrate the use of a download manager, but
these sample programs are not intended for use with the NAND flash on the RCM3365
and RCM3375 RabbitCore modules. The DLM_TCP.C and DLP_TCP.C sample pro-
grams found in the Dynamic C SAMPLES\DOWN_LOAD folder, are intended to be com-
piled to the program flash memory (which is a parallel flash memory). Custom
applications based on these sample programs may use the NAND flash for data storage.
User’s Manual
43