20-101-1051 Datasheet, PDF (143/165 Pages) List of Unclassifed Manufacturers – C-Programmable Core Module with NAND Flash Mass Storage and Ethernet

APPENDIX E. PROGRAMMING VIA
ETHERNET CROSSOVER CABLE
A RabbitSys-enabled RCM3365 module can also be pro-
grammed with a CAT5/6 Ethernet crossover cable connecting
the RCM3365 module directly to a PC or notebook. This appen-
dix describes the connection and how to set up the TCP/IP
parameters.
Section 2, “Getting Started,” describes how to connect a PC, notebook, or workstation to
an RCM3365 module via a serial programming cable or via a CAT 5/6 Ethernet cable. A
CAT 5/6 crossover Ethernet cable can be used to connect an RCM3365 module directly to
a PC, notebook, or workstation, but the TCP/IP parameters have to be entered into the
RCM3365 module and on to the PC, notebook, or workstation if the PC, notebook, or
workstation does not have a DHCP server. This appendix explains how to load the TCP/IP
parameters when the PC, notebook, or workstation if the PC, notebook, or workstation
does not have a DHCP server.
User’s Manual
137