N2893A Datasheet, PDF (8/29 Pages) List of Unclassifed Manufacturers – InfiniiVision Oscilloscope Probes and Accessories

08 | Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet
InfiniiMax Active Probes
and Accessories
1130A-34A InfiniiMax
high-performance active probe
system
–  1.5 - 7 GHz InfiniiMax probe system
–  InfiniiMax probe amplifier supports
both differential- and single-ended
measurements for a more
cost-effective solution
–  Unrivaled InfiniiMax probing
accessories support browsing,
solder-in, and socketed use models at
the maximum performance available
–  Compatible with 3000 X-, 4000 X-,
6000 X-, 5000, 6000, and 7000 Series
oscilloscopes (except for 6000 Series
100-MHz models)
The InfiniiMax 1130A Series probe
amplifier is a perfect complement to the
InfiniiVision 1 GHz or higher bandwidth
models. Its bandwidth, extremely low
input capacitance (0.32 pF), high
common mode rejection, and patented
resistor probe tip technology provide ultra
low loading of the DUT and superior signal
fidelity. Keysight’s innovative InfiniiMax
1130A Series differential probe is the
easiest-to-use, and highest performance
probing system available for high-speed
digital design, and represents a new
industry standard for accuracy, flexibility,
and reliability. Designers can achieve full
system bandwidth in conjunction with
InfiniiVision Series oscilloscopes even
when manually browsing with the probe or
making hands-off measurements.
Optional solder-in probe heads and
solder-in sockets, as well as browser
configuration provide full bandwidth at the
probe tip.
Operating characteristics
Probe bandwidth (–3 dB)
Rise and fall time
(10 to 90%)
Input capacitance
Input resistance
Input dynamic range
Input common mode range
Maximum signal slew rate
DC attenuation
Offset range
Maximum input voltage
ESD tolerance
Maximum number of probes
supported by
3000 X-/5000/6000/7000 Series
Maximum number of probes
supported by 4000 X- and 6000
X-Series
1134A: > 7 GHz
1132A: > 5 GHz
1131A: > 3.5 GHz
1130A: > 1.5 GHz
1134A: 60 psec
1132A: 86 psec
1131A: 100 psec
1130A: 233 psec
Cm = 0.1 pF Cm is between tips
Cg = 0.34 pF Cg is ground for each tip
Cdiff = 0.27 pF Differential mode capacitance = Cm + Cg/2
Cse = 0.44 pF Single-ended mode capacitance = Cm + Cg
Differential mode resistance = 50 kΩ ± 2%
Single-ended mode resistance = 25 kΩ ± 2%
±2.5 V
±6.75 Vdc to 100 Hz; ±1.25 V > 100 Hz
18 V/ns when probing a single-ended signal
30 V/ns when probing a differential signal
10:1 ± 3% before calibration on oscilloscope
10:1 ± 1% after calibration on oscilloscope
±12.0 V when probing single-ended signal
30 Vpeak, CAT I
> 8 kV from 100 pF, 300 Ω HBM
2
4
Keysight 1130A InfiniiMax probe offers you the highest performance available for measuring differential and
single-ended signals