N2893A Datasheet, PDF (26/29 Pages) List of Unclassifed Manufacturers – InfiniiVision Oscilloscope Probes and Accessories

26 | Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet
N2744A T2A Probe Interface Adapter
–  Enables Tektronix^® TekProbe-BNC^®
level 2 probes to connect to Keysight’s
AutoProbe interface on InfiniiVision
3000 X-, 4000 X-, 6000 X-, 5000,
6000, and 7000 oscilloscopes
–  An easy-to-use plug-on adapter to
the Keysight oscilloscope’s AutoProbe
interface
–  Provides necessary probe power,
calibration, and offset control as
needed to the attached TekProbe
probe
The N2744A T2A interface adapter
enables selected TekProbe® interface
level 2 probes to be used with Keysight
oscilloscopes with AutoProbe interface.
Existing TekProbe-BNC probe types can
simply be plugged into the T2A adapter
which is then plugged directly into any
AutoProbe input channel on an InfiniiVision
or Infiniium oscilloscope. Select the probe
model in the scope menu and the Keysight
oscilloscope sets up the attenuation factor
and the probe type automatically. The T2A
interface adapter supplies the necessary
probe power, calibration (for selected
models only) and offset control as used by
the connected TekProbe probe. The
adapter is targeted for customers using
both Tek active probes with TekProbe-BNC
level 2 interfaces and Keysight
oscilloscopes with the AutoProbe
interface.
Tek probe compatibility
The N2744A T2A adapter supports only
the probes listed below with TekProbe
interfaces.
AC/DC current probe
Single-ended active probes
P6243
P6245
P6205
P6241
P6249
Single-ended active probe, 1
GHz, 10:1 without offset control
Single-ended active probe,
1.5 GHz, 10:1 with offset control
Single-ended active probe, 750
MHz, 10:1 without offset control
Single-ended active probe,
4 GHz, 10:1 with offset control
Single-ended active probe,
4 GHz, 5:1 with offset control
Differential active probes
P5205 or
P5205A
P5210 or
P5210A
P6246
P6247
P6248
Differential probe, 100 MHz,
50:1/500:1 with offset control
Differential probe, 50 MHz,
100:1/1000:1 with offset control
400 MHz, 10:1/1:1 with offset
control
1 GHz, 10:1/1:1 with offset control
1.5 GHz, 10:1/1:1 with offset control
P6250
P6251
500 MHz, 50:1/5:1 with offset
control
1 GHz, 50:1/5:1 with offset control
TCP202 50-MHz AC/DC current probe
Keysight scope compatibility
–  Keysight InfiniiVision 6000 X-Series
with sofware version 6.00 or higher
–  Keysight InfiniiVision 3000 X-/4000
X-Series with software version 1.10 or
higher
–  Keysight InfiniiVision 5000, 6000,
and 7000 Series and future revisions
(except 6000 100-MHz) with software
version 06.16 or higher
Optical-to-Electrical Converters
(works with InfiniiVision 5000,
6000 and 7000 with version 6.16
software only)
P6701B
P6703B
P6711
P6713
1 GHz Optical-to-electrical
converter with FC/PC connector
1.2 GHz Optical-to-electrical
converter with FC/PC connector
250 MHz Optical-to-electrical
converter
300 MHz Optical-to-electrical
converter
Ordering information
N2744A T2A probe interface adapter