N2893A Datasheet, PDF (23/29 Pages) List of Unclassifed Manufacturers – InfiniiVision Oscilloscope Probes and Accessories

23 | Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet
Wedge Probe Adapters
Easy connection to surface
mount ICs
Safe, with no chance of shorting
Mechanically non-invasive contact
3-, 8-, and 16-signal versions
Supports 0.5 and 0.65‑mm
TQFP and PQFP packages
Problem-free probing
The Keysight wedge probe adapter
eliminates many of the frustrations
associated with probing surface mount
components. If you’ve ever accidentally
shorted IC pins together, experienced
electrical and/or mechanical problems
with soldering small wires onto leads, or
gotten frustrated juggling multiple probes
while you’re trying to operate your scope,
the Wedge was designed with you in mind.
Make the inaccessible accessible
When you use the Wedge, you don’t have
to worry about shorting IC pins together
on a delicate component–or worse yet on
an irreplaceable prototype. The Wedge
is easy to insert and it stays put. There’s
no need to solder small wires onto leads.
The Wedge is mechanically non-invasive,
so you won’t damage the legs of the IC.
Instead, you’ll have easy access to
hard-to-reach components.
Electrical reliability
The Wedge makes two contact points with
each leg of the IC. This redundant physical
connection increases the electrical
reliability of the connection. And the
Wedge’s low capacitance and inductance
provides superior performance to many
other alternatives.
IC clip kits
An inexpensive solution for probing
fine-pitch ICs, the 10072A SMT Kit
includes 10 IC clips and 2 dual-lead
adapters that connect the clips directly to
10070-family probes.
The 10075A 0.5‑mm IC clip kit is ideal
for connecting to IC’s as fine as 0.5 mm.
The clip body allows many clips to be
mounted side-by-side. The kit includes
four 0.5‑mm IC clips and two dual-lead
adapters that connect the IC clips directly
to 10070-family probes.
Keysight Wedge electrical
characteristics
Operating < 40 Vdc + peak ac
voltage
Operating 0.5 A maximum
current
Capacitance 2 pF typical (all except
between Keysight‑E2643A/44A)
contacts 4.33 pF typical at 1 MHz
(Keysight‑E2643A/44A)
Self-
15 nH typical (all except Keysight
inductance E2643A/44A)
37 nH typical at 1 MHz
(Keysight E2642A/44A)
Cross
–31 dB typical at 100 MHz
coupling (Keysight E2643A/44A)
Contact < 0.1 Ω
resistance
Ordering information
E2613A
E2614A
E2643A
E2615A
E2616A
E2644A
10072A
10075A
0.5 mm Wedge probe adapter,
3 signal, qty 1
0.5 mm Wedge probe adapter,
8 signal, qty 1
0.5 mm Wedge probe adapter,
16 signal, qty 1
0.65 mm Wedge probe adapter,
3 signal, qty 1
0.65 mm Wedge probe adapter,
8 signal, qty 1
0.65 mm Wedge probe adapter,
16 signal, qty 1
SMT kit for 10070 probe family
0.5 mm IC clip kit
The wedge probe adapter connects
directly to 1145A/1155A active probes
and the dual lead adapter provided with
the 1160A-65A passive probe family and
N2877A/N2879A accessory kits for use
with N287xA Series passive probes.