N2893A Datasheet, PDF (19/29 Pages) List of Unclassifed Manufacturers – InfiniiVision Oscilloscope Probes and Accessories

19 | Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet
Clamp-on Current Probes
–  Up to 100 MHz bandwidth and 500
Arms current
–  Hybrid technology to measure ac and
dc
–  Compatible with 1 MΩ scope input
Accurate current measurements
without breaking the circuit
Compatible with any scope or voltage
measuring instruments with BNC input,
the 1146B and N2780B Series current
probes offer accurate and reliable
solutions for measuring dc and ac
currents. The probes use a hybrid
technology that includes a Hall effect
sensor, which senses the dc current and a
current transformer, which senses the ac
current, making it unnecessary to make an
electrical connection to the circuit.
1146B 100 kHz current probe
The 1146B ac/dc current probe provides
accurate display and measurement of
currents from 100 mA to 100 Arms, dc to
100 kHz, without breaking into the circuit.
A battery level indicator and overload
indicator help ensure proper readings. It
connects directly to the scope through a
2-m coaxial cable with an insulated BNC.
1147B/N2893A 50-MHz/
100-MHz current probe with
AutoProbe interface
The 1147B/N2893A is a wide bandwidth,
dc to 50-MHz/100-MHz current probe.
The probe offers flat frequency response
across the entire dc to 50-MHz/100-MHz
bandwidth, low noise (< –2.5 mArms) and
low circuit insertion loss.
The 1147B/N2893A probe is compatible
with the AutoProbe interface, which
completely configures the oscilloscope
for the probe when used with the 3000
X-, 4000 X-, 5000, 6000 300 MHz - 1
GHz, 7000 Series scopes. Probe power is
provided by the scope, so there is no need
for an external power supply. The N2893A
uniquely provides auto demagnetization
and offset elimination feature when used
in conjuction with InfiniiVision or Infiniium
scopes.
N2780B/81B/82B/83B/83L
2‑MHz/10-MHz/50-MHz/
100-MHz current probe
The N2780B Series current probes are
high bandwidth, active current probes,
featuring flat bandwidth, low noise (2.5
mArms) and low circuit insertion loss. In
conjunction with the power supply (model
N2779A), this probe can be used with any
oscilloscope having a high-impedance
BNC input. The companion power supply
N2779A (3 x 12 Vdc output) lets you
connect up to any three N2780B-83B
current probes to a single power supply.
The N2783L 80 MHz current probe
offers 5 m long cable, which allows you to
reach DUTs in long distances very easily.
Other than the bandwidth performance,
the N2783A and N2783L have the same
electrical performance. The N2783L also
requires the N2779A power supply to
power the probe.
N2893A 100-MHz current probe with AutoProbe
interface
1147B 50‑MHz current probe with AutoProbe
interface
1146B 100-kHz current probe
N2780B Series current probes with N2779A power supply