N2893A Datasheet, PDF (18/29 Pages) List of Unclassifed Manufacturers – InfiniiVision Oscilloscope Probes and Accessories

18 | Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet
Mixed Signal Oscilloscope Logic Probes (continued)
The InfiniiVision MSO digital channels were architected to be compatible with a wide
variety of probing accessories developed over 20 years for logic analyzers. There’s a
good chance that the logic analyzer accessories you already own work with your MSO.
With the addition of an optional 40-pin cable, 01650-61607, the MSO accepts numerous
logic analyzer accessories:
–  E5346A 34-channel Mictor connector probe
–  E5385A 34-channel Samtec connector
–  E5383A 16-channel flying lead set
–  01650-63203 16-channel termination adaptor (also available as a bundle of both the
termination adapter and the 40-pin cable with PN 10085-68701)
–  E5404A 34-channel soft touch pro connectorless probe
–  E5394A 34-channel soft touch connectorless probe
–  E5396A 16-channel soft touch connectorless probe
–  Any other accessory that connects to a logic analyzer via a 40-pin cable
For logic accessories of greater channel width than MSO digital channels (> 16 channels),
there are two use models.
–  Route up to 16 signals to the probe and don’t use the additional probe channels.
–  Route up to 32 signals to the probe and measure 1/2 of them at a time. Simply plug
the 40-pin cable to the other side of the probe to see the other 1/2 of the signals.
E5396A 16-channel soft touch connectorless probe
E5346A 34-channel Mictor connector probe
E5385A 34-channel Samtec connector probe