N2893A Datasheet, PDF (14/29 Pages) List of Unclassifed Manufacturers – InfiniiVision Oscilloscope Probes and Accessories

14 | Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet
High-voltage Differential Active Probes (continued)
N2792A/N2818A 200-MHz and N2793A/N2819A 800-MHz
general-purpose differential probe
The N2792A/N2818A 200-MHz and N2793A/N2819A 800-MHz differential probes
provide the superior general-purpose differential signal measurements required for
today’s high-speed power measurements, vehicle bus measurements, and digital system
designs.
The N2792A/N2818A and N2793A/N2819A probes offer a 10:1 attenuation setting and
high input resistance and low input capacitance to minimize circuit loading.
The N2792A/93A are compatible with any oscilloscope with 50 Ω BNC input. The probe
can be powered by any USB port on a scope or computer, or by a 9 V battery. The
N2818A/19A are the AutoProbe interface versions of the N2792A/93A. They are
compatible with the InfiniiVision 3000 X-, 4000 X- and 6000 X-Series only.
N2790A 100-MHz, 1.4-kV differential probe with
AutoProbe interface
Characteristics for N2792A/N2818A and N2793A/N2819A
differential probes
Bandwidth
Risetime
Attenuation ratio
CMRR
Input impedance (between inputs)
Max input voltage to ground
Max input voltage between two inputs
Max number of probes supported by
InfiniiVision Series
N2792A/N2818A
200 MHz
1.75 ns
10:1
80 dB at 50/60 Hz
–50 dB at 10 MHz
1 MΩ//3.5 pF
±60 V
±20 V
4
N2793A/N2819A
800 MHz
437 ps
10:1
–60 dB at 50/60 Hz
–15 dB at 500 MHz
200 kΩ//1 pF
±40 V
±15 V
4
N2791A 25-MHz, 700-V differential probe
Ordering information for Keysight high voltage differential probes,
power supply and accessories
1141A
1142A
N2790A
N2791A
N2792A
N2818A
N2793A
N2819A
N2891A
N4853A
N4854A
N2804A
N2805A
N2816A
N2817A
200-MHz differential probe
Probe control and power module for 1141A
100-MHz, 1.4 kV differential probe with AutoProbe interface
25-MHz, 700-V differential probe
200-MHz, 20-V differential probe
200-MHz, 20-V differential probe with AutoProbe interface
800-MHz, 15-V differential probe
800-MHz, 15-V differential probe with AutoProbe interface
70-MHz, 7,000-V differential probe
Variable pitch browser for N2793A/N2819A, qty 2
DC blocking capacitor for N2793A/N2819A, qty 2
300 MHz high voltage differential probe
200 MHz high voltage differential probe with extended cable length
Probe tip accessory kit for N2804A including 2 each alligator clips, 2 each pincer
clips, and 2 each extension leads (30 cm)
Probe tip accessory kit for N2805A including 2 each alligator clips, 2 each hook
clips, 2 each pincer clips, and 2 each browser tips
N2792A 200-MHz, 20-V differential probe
N2793A 800-MHz, 15-V differential probe