N2893A Datasheet, PDF (11/29 Pages) List of Unclassifed Manufacturers – InfiniiVision Oscilloscope Probes and Accessories

11 | Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet
InfiniiMode Active Probes and Accessories (continued)
Characteristics and specifications for N2750A Series InfiniiMode probes
Model number
Probe bandwidth* (–3 dB)
Rise time, probe only (10-90%)
Input resistance (@DC)*
Input capacitance
Attenuation ratio (@DC)
Input dynamic range
Input common mode range
Offset range
Offset accuracy**
Maximum non-destructive
Input Voltage
Maximum number of probes supported by
3000 X-Series
Maximum number of probes supported by
4000 X-Series
N2750A
1.5 GHz
233 psec
200kΩ ± 2% (differential mode)
100kΩ ± 2% (single-ended mode)
50kΩ ± 2% (common mode)
700 fF (with browser)
2:1 / 10:1
±1 V, 2 Vpp (@2:1) / ±5 V, 10 Vpp (@10:1)
±15 V (from DC to 100 Hz), ±2.5 V (for >100 Hz) ***
±15 V
< 3%
±30 V (DC + peak AC)
1
4
N2751A
3.5 GHz
100 psec
* Denotes warranted electrical specifications at 2:1 attenuation mode after 20 minute warm-up, All others are typical.
** When calibrated on the oscilloscope, these characteristics are determined by the oscilloscope characteristics.
*** Assumes symmetric differential signals.
N2752A
6 GHz
58.3 psec
N2750A with browser tip
N2750A with socketed tip
N2750A with solder-in tip
For more information about the N2750A Series InfiniiMode probes, refer to the data sheet with the Keysight literature number,
5991-0560EN.