MC3410 Datasheet, PDF (8/75 Pages) NXP Semiconductors – 10-Bit high-speed multiplying D/A converter

MC3410 3-Axis Accelerometer
3.2 PIN DESCRIPTION
Pin
1
2
3
4
5
6
7
8
9
10
11
12
Table 2. Pin Description
Name
NC
SDA ¹
DVDD
NC
INTN ²
VPP
AVDD
NC
GND
TEST
NC
SCL ¹
Function
No connect
I2C serial data input/output
I/O power supply
No connect
Interrupt active LOW ³
Connect to GND
Analog power supply
No Connect
Ground
Optional probe pin
No connect
I2C serial clock input
Datasheet
Notes:
1) This pin requires a pull-up resistor, typically 4.7kΩ to DVDD. Refer to I2C Specification
for Fast-Mode devices. Higher resistance values can be used (typically done to reduce
current leakage) but such applications are outside the scope of this datasheet.
2) This pin can be configured by software to operate either as an open-drain output or
push-pull output (MODE: Register). If set to open-drain, then it requires a pull-up
resistor, typically 4.7kΩ to DVDD.
3) INTN pin polarity is programmable in the MODE: Register.
mCube Proprietary.
APS-048-0010v2.2
© 2014 mCube Inc. All rights reserved.
8 / 75