MC3410 Datasheet, PDF (15/75 Pages) NXP Semiconductors – 10-Bit high-speed multiplying D/A converter

MC3410 3-Axis Accelerometer
Datasheet
4.3.2 I2C ELECTRICAL CHARACTERISTICS
Parameter
LOW level input voltage
HIGH level input voltage
Hysteresis of Schmitt trigger inputs
Output voltage, pin INTN, Iol ≤ 2 mA
Output voltage, pin SDA (open drain),
Iol ≤ 1 mA
Input current, pins SDA and SCL (input voltage
between 0.1*DVDD and 0.9*DVDD max)
Capacitance, pins SDA and SCL ⁴
Table 6. I2C Electrical and Timing Characteristics
Symbol
VIL
VIH
Vhys
Vol
Voh
Vols
Ii
Ci
Min
-0.5
0.7*DVDD
0.05*DVDD
0
0
-
-10
-
Max Unit
0.3*DVDD V
-
V
-
V
0.4
V
0.9*DVDD V
0.1*DVDD V
10
µA
10
pF
NOTES:
 If multiple slaves are connected to the I2C signals in addition to this device, only 1 pull-
up resistor on each of SDA and SCL should exist. Also, care must be taken to not
violate the I2C specification for capacitive loading.
 When DVDD is not powered and set to 0V, INTN, SDA and SCL will be held to DVDD
plus the forward voltage of the internal static protection diodes, typically about 0.6V.
 When DVDD is disconnected from power or ground (e.g. Hi-Z), the device may become
inadvertently powered up through the ESD diodes present on other powered signals.
4 _{Values are based on device characterization, not tested in production.}
mCube Proprietary.
APS-048-0010v2.2
© 2014 mCube Inc. All rights reserved.
15 / 75