MC3410 Datasheet, PDF (40/75 Pages) NXP Semiconductors – 10-Bit high-speed multiplying D/A converter

MC3410 3-Axis Accelerometer
Datasheet
11 REGISTER INTERFACE
The device has a simple register interface which allows a MCU or I2C master to configure and
monitor all aspects of the device. This section lists an overview of user programmable
registers. By convention, Bit 0 is the least significant bit (LSB) of a byte register.
Two registers are needed in order to contain each sample, the XOUT_EX, YOUT_EX &
ZOUT_EX: X, Y, Z-Axis Extended Accelerometer Registers. The least significant byte is
located in the register with a lower address (e.g. XOUT_EX_L), followed by the most
significant byte in the next higher address (e.g. XOUT_EX_H).
mCube Proprietary.
APS-048-0010v2.2
© 2014 mCube Inc. All rights reserved.
40 / 75