MC3410 Datasheet, PDF (23/75 Pages) NXP Semiconductors – 10-Bit high-speed multiplying D/A converter

MC3410 3-Axis Accelerometer
Datasheet
8.3 GINT INTERRUPT
The GINT interrupt can trigger on each sample period (default), or be “filtered” by the
bandwidth setting of the LPF. If the OUTCFG: Output Configuration Register IRATE bit is
inactive, then the GINT interrupt will trigger each sample period. If the IRATE bit is active, the
GINT interrupt rate will be updated based on the low-pass filter setting controlled by bit-field
LPF.
mCube Proprietary.
APS-048-0010v2.2
© 2014 mCube Inc. All rights reserved.
23 / 75