LM3S2110 Datasheet, PDF (32/485 Pages) List of Unclassifed Manufacturers – Microcontroller

Architectural Overview
1.4.7.3
1.4.8
Micro TDO outputs. The multiplexer is controlled by the Luminary Micro JTAG controller, which has
comprehensive programming for the ARM, Luminary Micro, and unimplemented JTAG instructions.
System Control and Clocks (see page 54)
System control determines the overall operation of the device. It provides information about the
device, controls the clocking of the device and individual peripherals, and handles reset detection
and reporting.
Hardware Details
Details on the pins and package can be found in the following sections:
■ “Pin Diagram” on page 436
■ “Signal Tables” on page 437
■ “Operating Characteristics” on page 449
■ “Electrical Characteristics” on page 450
■ “Package Information” on page 461
32
November 29, 2007
Preliminary