English
Language : 

NUC951ADN Datasheet, PDF (300/590 Pages) Nuvoton Technology Corporation – 32-bit ARM926EJ-S Based Microcontroller
NUC951ADN
32-BIT ARM926EJ-S BASED MCU
NAND Flash Interrupt Status Register (SMISR)
Register
SMISR
31
23
15
7
Address
0xB000_D0AC
R/W
R/W
Description
NAND Flash Interrupt Status Register
Reset Value
0x000X_0000
30
29
28
27
Reserved
22
21
20
19
Reserved
14
13
12
11
Reserved
6
5
4
3
Reserved
26
18
RB_
10
RB_IF
2
25
17
CD1_
9
CD1_IF
1
ECC_IF
24
16
CD0_
8
CD0_IF
0
DMA_IF
Bits
[18]
[17]
[16]
[10]
[9]
[8]
Descriptions
RB_
CD1_
CD0_
RB_IF
CD1_IF
CD0_IF
Ready/-Busy Pin Status (Read Only)
This bit reflects the Ready/-Busy pin status of Smart Media card.
Card Detect Pin Status of SM1 (Read Only)
This bit is the card detect pin status of SM1, and it is using for card detection.
When there is a card inserted in or removed from SM1, software should check
this bit to confirm if there is really a card insertion or remove.
Card Detect Pin Status of SM0 (Read Only)
This bit is the card detect pin status of SM0, and it is using for card detection.
When there is a card inserted in or removed from SM0, software should check
this bit to confirm if there is really a card insertion or remove.
Ready/-Busy Rising Edge Detect Interrupt Flag (Read Only)
 0 = R/-B rising edge is not detected.
 1 = R/-B rising edge is detected.
NOTE: This bit is read only, but can be cleared by writing ‘1’ to it.
SM Card 1 Detection Interrupt Flag (Read Only)
This bit indicates that SM card 1 is inserted or removed. Only if
SMIER[CD1_IE] is set to 1, this bit is active.
 0 = No card is inserted or removed.
 1 = There is a card inserted in or removed from SM1.
NOTE: This bit is read only, but can be cleared by writing ‘1’ to it.
SM Card 0 Detection Interrupt Flag (Read Only)
This bit indicates that SM card 0 is inserted or removed. Only if
SMIER[CD0_IE] is set to 1, this bit is active.
 0 = No card is inserted or removed.
 1 = There is a card inserted in or removed from SM0.
NOTE: This bit is read only, but can be cleared by writing ‘1’ to it.
Publication Release Date: Sep. 10, 2012
300
Revision: A5