NUC951ADN Datasheet, PDF (251/590 Pages) Nuvoton Technology Corporation – 32-bit ARM926EJ-S Based Microcontroller

NUC951ADN
32-BIT ARM926EJ-S BASED MCU
[7]
PING_IE
PING Token Interrupt Enable.
When set, this bit enables a local interrupt to be set when a ping
token has been received from the host.
[6]
IN_TK_IE
Data IN Token Interrupt Enable.
When set, this bit enables a local interrupt to be set when a Data IN
token has been received from the host.
Data OUT Token Interrupt Enable.
[5]
OUT_TK_IE
When set, this bit enables a local interrupt to be set when a Data
OUT token has been received from the host.
Data Packet Received Interrupt Enable.
[4]
DATA_RxED_IE When set, this bit enables a local interrupt to be set when a data
packet has been transmitted to the host.
Data Packet Transmitted Interrupt Enable.
[3]
DATA_TxED_IE When set, this bit enables a local interrupt to be set when a data
packet has been received from the host.
Short Packet Transferred Interrupt Enable.
[2]
SHORT_PKT_IE When set, this bit enables a local interrupt to be set when a short
data packet has been transferred to/from the host.
[1]
EMPTY_IE
Buffer Empty Interrupt.
When set, this bit enables a local interrupt to be set when a buffer
empty condition is detected on the bus.
[0]
FULL_IE
Buffer Full Interrupt.
When set, this bit enables a local interrupt to be set when a buffer
full condition is detected on the bus.
Publication Release Date: Sep. 10, 2012
251
Revision: A5