M0518 Datasheet, PDF (20/72 Pages) List of Unclassifed Manufacturers – 36/68 Kbytes flash, 8K bytes SRAM

NuMicro M0518 Series Datasheet
Pin No.
LQFP LQFP ^{Pin Name}
64-pin 48-pin
Pin
Type
Description
UART3_RXD
I Data receiver input pin for UART3.
PA.6
I/O General purpose digital I/O pin.
50
38 ADC_CH6
AI ADC_CH6 analog input.
UART3_TXD
O Data transmitter output pin for UART3.
PA.7
I/O General purpose digital I/O pin.
51
39 ADC_CH7
AI ADC_CH7 analog input.
VREF
AP Voltage reference input for ADC.
52
40 AVDD
AP Power supply for internal analog circuit.
PC.7
I/O General purpose digital I/O pin.
UART4_RXD
I Data reveiver input pin for UART4.
53
41
I2C0_SCL
I/O I²C0 clock pin.
PWM0_BRAKE1 I PWM0 brake input pin.
PC.6
I/O General purpose digital I/O pin.
UART4_TXD
O Data transmitter output pin for UART4.
54
42
I2C0_SDA
I/O I²C0 data input/output pin.
PWM0_BRAKE0 I PWM0 brake input pin.
55
PC.15
I/O General purpose digital I/O pin.
56
PC.14
I/O General purpose digital I/O pin.
PB.15
I/O General purpose digital I/O pin.
INT1
I External interrupt1 input pin.
57
43 TM0_EXT
I Timer0 external capture input pin.
TM0
O Timer0 toggle output pin.
BPWM1_CH5
I/O BPWM1 CH5 output/Capture input.
PF.0
58
44
XT1_OUT
I/O General purpose digital I/O pin.
O External 4~24 MHz (high speed) crystal output pin.
PF.1
59
45
XT1_IN
I/O General purpose digital I/O pin.
I External 4~24 MHz (high speed) crystal input pin.
60
46 nRESET
I
External reset input: active LOW, with an internal pull-up. Set this pin low reset
chip to initial state.
61
VSS
P Ground pin for digital circuit.
62
VDD
P Power supply for I/O ports and LDO source for internal PLL and digital circuit.
PF.8
63
47
CLKO
I/O General purpose digital I/O pin.
O Frequency divider clock output pin.
Feb 08, 2017
Page 20 of 72
Revision 1.01