M0518 Datasheet, PDF (10/72 Pages) List of Unclassifed Manufacturers – 36/68 Kbytes flash, 8K bytes SRAM

NuMicro M0518 Series Datasheet
 I²C
– Up to two sets of I²C devices
– Master/Slave mode
– Bidirectional data transfer between masters and slaves
– Multi-master bus (no central master)
– Arbitration between simultaneously transmitting masters without corruption of serial data on
the bus
– Serial clock synchronization allowing devices with different bit rates to communicate via one
serial bus
– Serial clock synchronization used as a handshake mechanism to suspend and resume serial
transfer
– Programmable clocks allowing for versatile rate control
– Supports multiple address recognition (four slave address with mask option)
– Supports wake-up function
 ADC
– 12-bit SAR ADC with 800 kSPS
– Up to 8-ch single-end input or 4-ch differential input
– Single scan/single cycle scan/continuous scan
– Each channel with individual result register
– Scan on enabled channels
– Threshold voltage detection
– Conversion started by software programming or external input
 96-bit unique ID (UID)
 128-bit unique customer ID(UCID)
 Brown-out Detector
– With 4 levels: 4.4 V/3.7 V/2.7 V/2.2 V
– Supports Brown-out Interrupt and Reset option
 Low Voltage Reset
– Threshold voltage level: 2.0 V
 Operating Temperature: -40℃ ~ +105℃
 Packages:
– All Green package (RoHS)
– LQFP 64-pin / 48-pin (7mm x 7mm)
Feb 08, 2017
Page 10 of 72
Revision 1.01