NRF9E5 Datasheet, PDF (76/104 Pages) List of Unclassifed Manufacturers – 433/868/915MHz RF Transceiver with Embedded 8051 Compatible Microcontroller and 4 Input, 10 Bit ADC

PRODUCT SPECIFICATION
nRF9 E5 Single Chip Transceiver with Embedded Microcontroller and ADC
CPU_CLK
Divide by 12
Divide by 4
P05/T0 (P06/T1)
T0M (T1M)
0
C/T
1
0
1
TR0 (TR1)
GATE
TL0 (TL1)
clk 0 1 2 3 4 5 6 7
Mode 0
Mode 1
TH0 (TH1)
01 23 45 67
P03/INT0_N (P04/INT1_N)
P0_ALT.3 (P0_ALT.4)
INT
TF0 (TF1)
Figure 18 Timer 0/1 – Modes 0 and 1.
To serial port
(timer 1 only)
18.8.1.3 Mode 2
Mode 2 operation is the same for Timer 0 and Timer 1. In mode 2, the timer is
configured as an 8-bit counter, with automatic reload of the start value. The LSB register
(TL0 or TL1) is the counter, and the MSB register (TH0 or TH1) stores the reload value.
As illustrated in Figure 19 Timer 0/1 – Mode 2, mode 2 counter control is the same as
for mode 0 and mode 1. However, in mode 2, when TLn increments from 0xFF, the
value stored in THn is reloaded into TLn.
CPU_CLK
Divide by 12
Divide by 4
P05/T0 (P06/T1)
T0M (T1M)
0
C/T
0
1
1
TL0 (TL1)
clk 0 1 2 3 4 5 6 7
TR0 (TR1)
GATE
0 12 34 56 7
TH0 (TH1)
P03/INT0_N (P04/INT1_N)
P0_ALT.3 (P0_ALT.4)
Figure 19 Timer 0/1 – Mode 2.
INT
TF0 (TF1)
To serial port
(timer 1 only)
Main office: Nordic Semiconductor ASA - Vestre Rosten 81, N-7075 Tiller, Norway -Phone [phone] - Fax [phone]
Revision: 1.1
Page 76 of 104
June 2004