NRF9E5 Datasheet, PDF (40/104 Pages) List of Unclassifed Manufacturers – 433/868/915MHz RF Transceiver with Embedded 8051 Compatible Microcontroller and 4 Input, 10 Bit ADC

PRODUCT SPECIFICATION
nRF9 E5 Single Chip Transceiver with Embedded Microcontroller and ADC
11.8 ADC Configuration Register Contents
Byte #
0
1
ADC_CONFIG_REG (R/W)
Content bit[7:0], MSB = bit[7]
Control: CHSEL[7:4], VFSSEL, PWR_UP, ADCRUN, CSTARTN
Static: bit[7:4] not used, ADC_RL_JUST, DIFFMODE, RESCTRL[1:0]
Table 29 ADC Configuration Register contents.
Init value
0000_0001
0000_0010
11.9 ADC Data Register Contents
Byte #
0
1
ADC_DATA_REG (R)
Content bit[7:0], MSB = bit[7]
Left or right justified data from ADC
Left or right justified data from ADC
Table 30 ADC DATA Register contents.
Init value
X
X
11.10 Status Register Contents
Byte #
0
STATUS_REGISTER (R)
Content bit[7:0], MSB = bit[7]
AM, CD, DR, EOC, ADC_RFLAG[2:0], Even parity
Table 31 Status Register contents.
Init value
X
The length of all registers is fixed. However, the bytes in TX_PAYLOAD,
RX_PAYLOAD, TX_ADDRESS and RX_ADDRESS used in ShockBurst ^TM RX/TX
are set in the configuration register. Register content is not lost when the device enters
one of the power saving modes.
Main office: Nordic Semiconductor ASA - Vestre Rosten 81, N-7075 Tiller, Norway -Phone [phone] - Fax [phone]
Revision: 1.1
Page 40 of 104
June 2004