LM3S611 Datasheet, PDF (290/409 Pages) List of Unclassifed Manufacturers – Microcontroller

Synchronous Serial Interface (SSI)
Bit/Field
1
Name
SSE
0
LBM
Type
R/W
R/W
Reset
0
0
Description
SSI Synchronous Serial Port Enable
Setting this bit enables SSI operation.
0: SSI operation disabled.
1: SSI operation enabled.
Note: This bit must be set to 0 before any control registers
are reprogrammed.
SSI Loopback Mode
Setting this bit enables Loopback Test mode.
0: Normal serial port operation enabled.
1: Output of the transmit serial shift register is connected
internally to the input of the receive serial shift register.
290
April 27, 2007
Preliminary