EN25QH256 Datasheet, PDF (31/74 Pages) Eon Silicon Solution Inc. – 256 Megabit Serial Flash Memory with 4Kbyte Uniform Sector

EN25QH256
The instruction sequence is shown in Figure 11.1 while using the Enable Quad Peripheral Interface
mode (EQPI) (38h) command.
NOTE : In the OTP mode, WRSR command will ignore input data and program OTP_LOCK bit to 1.
Figure 11. Write Status Register Instruction Sequence Diagram
Figure 11.1 Write Status Register Instruction Sequence under EQPI Mode
This Data Sheet may be revised by subsequent versions
31
or modifications due to changes in technical specifications.
©2004 Eon Silicon Solution, Inc.,
Rev. E, Issue Date: 2012/01/30
www.eonssi.com