EVK1100 Datasheet, PDF (58/59 Pages) ATMEL Corporation – Install the MICTOR38 connector on the EVK1100 board

Firmware Upgrade
Firmware upgrade progress can be monitored by activating the Progress view.
Figure 7-3. Firmware upgrade progress
A firmware upgrade report can be found in the Console view.
Figure 7-4. Firmware upgrade report
7.3 Adapter in use
The firmware version test is a process that is running in the background. This may cause a situation
where the adapter is busy (debug session active) when AVR32 Studio determines that the firmware
should be upgraded. In this case, the firmware upgrade process will wait until the adapter is not busy
anymore (debug session terminated).
Figure 7-5. Firmware upgrade process waiting for adapter
AVR ONE! Quick-start Guide
7-2
32103C–AVR ONE!–02/10