EVK1100 Datasheet, PDF (22/59 Pages) ATMEL Corporation – Install the MICTOR38 connector on the EVK1100 board

Software Installation
4.5 Connect the AVR ONE! to power and USB host
Connect the AVR ONE! to power using the supplied power supply.
Connect the AVR ONE! to the USB host (PC) using the supplied USB cable
Turn on the AVR ONE! using the power switch next to the power connector
Figure 4-19. AVR ONE! connected to power and USB
AVR ONE! Quick-start Guide
4-11
32103C–AVR ONE!–02/10