EVK1100 Datasheet, PDF (50/59 Pages) ATMEL Corporation – Install the MICTOR38 connector on the EVK1100 board

6.6 Start the trace debug session
Figure 6-36. Resume debug session
Create demo application
Make sure that the main() process is still selected in the Debug view before pressing the Resume
button.
Figure 6-37. LCD Display showing original message
The display should look like this.
Push the joystick button on the EVK1100 evaluation board a few times, until the trace buffer is full and
the target stops (6-7 button operations should be enough).
AVR ONE! Quick-start Guide
6-23
32103C–AVR ONE!–02/10