EVK1100 Datasheet, PDF (47/59 Pages) ATMEL Corporation – Install the MICTOR38 connector on the EVK1100 board

Figure 6-32. Tracepoint (Start)
Create demo application
Set Tracepoint Configuration values:
– Set Trigger Event to Program Counter
– Set Trace Operation to Start Trace
– Set Tracepoint type to both Program trace and Data trace
– Click OK
This will create a tracepoint that starts both program and data trace when the program counter hits this
code line.
Scroll down to and select line 364 in the file DIP204_Example.c and then select Run>Toggle Tracepoint.
AVR ONE! Quick-start Guide
6-20
32103C–AVR ONE!–02/10