EVK1100 Datasheet, PDF (55/59 Pages) ATMEL Corporation – Install the MICTOR38 connector on the EVK1100 board

Figure 6-46. Source code edit finished
Create demo application
Start a new debug session. AVR32 Studio uses the previous Launch Configuration if you just press the
Debug button.
Figure 6-47. The Debug button
Figure 6-48. Save edited source code dialog
Confirm saving the edited source code file. AVR32 Studio2.5 will now rebuild the project and program
the target MCU FLASH. The code will run from start to main() and halt.
AVR ONE! Quick-start Guide
6-28
32103C–AVR ONE!–02/10