EVK1100 Datasheet, PDF (32/59 Pages) ATMEL Corporation – Install the MICTOR38 connector on the EVK1100 board

6.2.2
Configure target board and MCU
Select the Details tab.
Figure 6-9. Setting the board and device type
Create demo application
Set MCU to UC3A0512 or UC3A0512ES, depending on what MCU is installed on your EVK1100.
Figure 6-10. MCU Markings
To check which type of MCU is mounted on your EVK1100 evaluation board, you can read the part num-
ber printed on the MCU. The picture shows the part number printed on an -ES part (-UES suffix).
Set Board to EVK1100.
AVR ONE! Quick-start Guide
6-5
32103C–AVR ONE!–02/10