EF4442 Datasheet, PDF (15/21 Pages) ATMEL Corporation – ARINC 429 Multi-channel Buffer Receiver (RTA) (N Channel, Silicon Gate)

EF4442
Preparation For
Delivery
Packaging
The microcircuits are packaged in a hermetically sealed package which is conformed to
case outlines of MIL-STD-883 28 lead DIL/SB
Certificate of Compliance Atmel offers a certificate of compliance with each shipment of parts, affirming the prod-
ucts are in compliance either with MIL-STD-883 or Atmel standard and guaranteeing the
parameters are tested at extreme temperatures for the entire temperature range.
Handling
Devices must be handled with certain precautions to avoid damage due to accumulation
of static charge. Input protection devices have been designed in the chip to minimize the
effect of this static buildup. However, the following handling practices are
recommended:
1. Device should be handled on benches with conductive and grounded surface.
2. Ground test equipment, tools and operator.
3. Do not handle devices by the leads.
4. Store devices in conductive foam or carriers.
5. Avoid use of plastic, rubber, or silk.
6. Maintain relative humidity above 50%, if practical.
15
2112A–HIREL–11/02