SAM4C_14 Datasheet, PDF (1123/1303 Pages) ATMEL Corporation – Atmel | SMART ARM-based Flash MCU

1: Set when the USBFS sends a resume signal called “Upstream Resume”. This triggers a USB interrupt if
USBFS_DEVIMR.UPRSME = 1.
• PEP_x: Endpoint x Interrupt
0: Cleared when the interrupt source is serviced.
1: Set when an interrupt is triggered by the endpoint x (USBFS_DEVEPTISRx, USBFS_DEVEPTIMRx). This triggers a
USB interrupt if USBFS_DEVIMR.PEP_x = 1.
• DMA_x: DMA Channel x Interrupt
0: Cleared when the USBFS_DEVDMASTATUSx interrupt source is cleared.
1: Set when an interrupt is triggered by the DMA channel x. This triggers a USB interrupt if DMA_x = 1.
SAM4C Series [DATASHEET]
Atmel-11102E-ATARM-SAM4C32-SAM4C16-SAM4C8-Datasheet_06-Oct-14
1123