EP20K300EQC240-1 Datasheet, PDF (62/117 Pages) Altera Corporation – Programmable Logic Device Family

APEX 20K Programmable Logic Device Family Data Sheet
Table 26. APEX 20K 5.0-V Tolerant Device Capacitance Notes (2), (14)
Symbol
Parameter
Conditions
Min
Max Unit
C_IN
C_INCLK
Input capacitance
Input capacitance on dedicated
clock pin
V_IN = 0 V, f = 1.0 MHz
V_IN = 0 V, f = 1.0 MHz
8
pF
12
pF
C_OUT Output capacitance
V_OUT = 0 V, f = 1.0 MHz
8
pF
Notes to Tables 23 through 26:
(1) See the Operating Requirements for Altera Devices Data Sheet.
(2) All APEX 20K devices are 5.0-V tolerant.
(3) Minimum DC input is –0.5 V. During transitions, the inputs may undershoot to –2.0 V or overshoot to 5.75 V for
input currents less than 100 mA and periods shorter than 20 ns.
(4) Numbers in parentheses are for industrial-temperature-range devices.
(5) Maximum V_CC rise time is 100 ms, and V_CC must rise monotonically.
(6) All pins, including dedicated inputs, clock I/O, and JTAG pins, may be driven before V_CCINT and V_CCIO are
powered.
(7) Typical values are for T_A= 25° C, V_CCINT = 2.5 V, and V_CCIO = 2.5 or 3.3 V.
(8) These values are specified in the APEX 20K device recommended operating conditions, shown in Table 26 on
page 62.
(9) The APEX 20K input buffers are compatible with 2.5-V and 3.3-V (LVTTL and LVCMOS) signals. Additionally, the
input buffers are 3.3-V PCI compliant when V_CCIO and V_CCINT meet the relationship shown in Figure 33 on page 68.
(10) The I_OH parameter refers to high-level TTL, PCI or CMOS output current.
(11) The I_OL parameter refers to low-level TTL, PCI, or CMOS output current. This parameter applies to open-drain pins
as well as output pins.
(12) This value is specified for normal device operation. The value may vary during power-up.
(13) Pin pull-up resistance values will be lower if an external source drives the pin higher than V_CCIO.
(14) Capacitance is sample-tested only.
Tables 27 through 30 provide information on absolute maximum ratings,
recommended operating conditions, DC operating conditions, and
capacitance for 1.8-V APEX 20KE devices.
Table 27. APEX 20KE Device Absolute Maximum Ratings Note (1)
Symbol
Parameter
V _CCINT
V _CCIO
V_I
I _OUT
T _STG
T _AMB
T_J
Supply voltage
DC input voltage
DC output current, per pin
Storage temperature
Ambient temperature
Junction temperature
Conditions
With respect to ground (2)
No bias
Under bias
PQFP, RQFP, TQFP, and BGA packages,
under bias
Ceramic PGA packages, under bias
Min
Max Unit
–0.5
2.5
V
–0.5
4.6
V
–0.5
4.6
V
–25
25
mA
–65
150
°C
–65
135
°C
135
°C
150
°C
62
Altera Corporation