English
Language : 

EP3C120F484C7 Datasheet, PDF (234/274 Pages) Altera Corporation – Cyclone III Device Handbook
9–76
Chapter 9: Configuration, Design Security, and Remote System Upgrades in the Cyclone III Device Family
Remote System Upgrade
Figure 9–33 shows the block diagrams to implement remote system upgrade with the
AS and AP configuration schemes.
Figure 9–33. Remote System Upgrade Block Diagrams for AS and AP Configuration Schemes
Serial Configuration Device
Parallel Flash Memory
Cyclone III or
Cyclone III LS
Device
Cyclone III Device
Nios Processor or User
Logic
Nios Processor or User
Logic
Serial Configuration Device
Supported Parallel Flash
1 Remote system upgrade only supports single-device configuration.
When using remote system upgrade in Cyclone III devices, you must set the mode
select pins (MSEL [3.0]) to the AS or AP configuration scheme. When using remote
system upgrade in Cyclone III LS devices, you must set MSEL [3..0] to the AS
configuration scheme. The MSEL pin setting in remote system upgrade mode is the
same as standard configuration mode. Standard configuration mode refers to normal
Cyclone III device family configuration mode with no support for remote system
upgrades, and the remote system upgrade circuitry is disabled. When using remote
system upgrade in Cyclone III device family, you must enable the remote update
mode option setting in the Quartus II software. For more information, refer to
“Enabling Remote Update” on page 9–76.
Enabling Remote Update
You can enable or disable remote update for Cyclone III device family in the
Quartus II software before design compilation (in the Compiler Settings menu). To
enable remote update in the compiler settings of the project, perform the following
steps in the Quartus II software:
1. On the Assignments menu, click Device. The Settings dialog box appears.
2. Click Device and Pin Options. The Device and Pin Options dialog box appears.
3. Click the Configuration tab.
4. From the Configuration Mode list, select Remote.
5. Click OK.
6. In the Settings dialog box, click OK.
Cyclone III Device Handbook
Volume 1
August 2012 Altera Corporation