AK4343 Datasheet, PDF (75/98 Pages) Asahi Kasei Microsystems – Stereo DAC with HP/RCV/SPK-AMP

ASAHI KASEI
[AK4343]
Addr
0FH
Register Name
Mode Control 4
Default
D7
D6
D5
D4
D3
D2
D1
D0
0
0
0
0
AVOLC HPM MINH DACH
0
0
0
0
1
0
0
0
DACH: Switch Control from DAC to Headphone-Amp
0: OFF (Default)
1: ON
MINH: Switch Control from MIN pin to Headphone-Amp
0: OFF (Default)
1: ON
HPM: Headphone-Amp Mono Output Select
0: Stereo (Default)
1: Mono
When the HPM bit = “1”, DAC output signal is output to Lch and Rch of the Headphone-Amp as (L+R)/2.
AVOLC: ALC Block Digital Volume Control Mode Select
0: Independent
1: Dependent (Default)
When AVOLC bit = “1”, AVL7-0 bits control both Lch and Rch volume level, while register values of
AVL7-0 bits are not written to AVR7-0 bits. When AVOLC bit = “0”, AVL7-0 bits control Lch level and
AVR7-0 bits control Rch level, respectively.
Addr
10H
Register Name
Power Management 3
Default
D7
INR1
0
D6
INL1
0
D5
D4
D3
D2
D1
D0
HPG MDIF2 MDIF1 INR0 INL0
0
0
0
0
0
0
0
INL1-0: Gain-Amp Lch Input Source Select
Default: 00 (LIN1 pin)
INR1-0: Gain-Amp Rch Input Source Select
Default: 00 (RIN1 pin)
MDIF1: Single-ended / Full-differential Input Select 1
0: Single-ended input (LIN1/RIN1 pins: Default)
1: Full-differential input (IN1+/IN1− pins)
MDIF1 bit selects the input type of pins #32 and #31.
MDIF2: Single-ended / Full-differential Input Select 2
0: Single-ended input (LIN2/RIN2 pins: Default)
1: Full-differential input (IN2+/IN2− pins)
MDIF2 bit selects the input type of pins #30 and #29.
HPG: Headphone-Amp Gain Select (See Table 49.)
0: 0dB (Default)
1: +3.6dB
MS0478-E-01
- 75 -
2006/10