AK4538 Datasheet, PDF (45/70 Pages) Asahi Kasei Microsystems – 16Bit DS CODEC with MIC/HP/SPK-AMP

ASAHI KASEI
[AK4538]
Addr
02H
Register Name
Signal Select 1
R/W
Default
D7
MOGN
R/W
0
D6
PSMO
R/W
0
D5
DAMO
R/W
0
D4
MICM
R/W
0
D3
BPSSP
R/W
0
D2
BPMSP
R/W
0
D1
ALCS
R/W
0
D0
MOUT2
R/W
0
MOUT2: MOUT2 Output Enable (Mixing = (L+R)/2)
0: OFF (Default)
1: ON
When the MOUT2 bit = “0”, the MOUT2 pin outputs VCOM voltage. The MOUT2 pin outputs signal at the
MOUT2 bit = “1”. This bit is valid at the PMSPK bit = “1”. Hi-Z is output at the PMSPK bit = “0”.
ALCS: ALC2 to Speaker-amp Enable
0: OFF (Default)
1: ON
ALC2 output signal is mixed to Speaker-amp at the ALCS bit = “1”.
BPMSP: BEEPM to Speaker-amp Enable
0: OFF (Default)
1: ON
Mono BEEP signal (BEEPM pin) is mixed to Speaker-amp at the BPMSP bit = “1”.
BPSSP: BEEPL/BEEPR to Speaker-amp Enable
0: OFF (Default)
1: ON
Stereo BEEP signals (BEEPL/BEEPR pins) are mixed to Speaker-amp at the BPSSP bit = “1”.
MICM: Switch Control from Mic In to Mono Mixer.
0: OFF (Default)
1: ON
DAMO: DAC to MOUT+/MOUT- Enable
0: OFF (Default)
1: ON
DAC output signal is output through Mono Line Output (MOUT+/MOUT-pins) at the DAMO bit = “1”.
PSMO: MOUT+/MOUT- Output Enable (Mixing = (L+R)/2)
0: Power Save Mode (Default)
1: ON
When the PSMO bit = “0”, Mono Line Output is in power save mode and the MOUT+ and MOUT- pins output
0.45 x AVDD voltage.
MOGN: Gain control for mono output
0: +6dB (Default)
1: -17dB
MS0198-E-01
- 45 -
2003/5