AM1705DPTPA3 Datasheet, PDF (36/164 Pages) Texas Instruments – AM1705 ARM Microprocessor

AM1705
SPRS657D – FEBRUARY 2010 – REVISED MARCH 2013
www.ti.com
4.3 Notes on Recommended Power-On Hours (POH)
The information in the section below is provided solely for your convenience and does not extend or
modify the warranty provided under TI’s standard terms and conditions for TI semiconductor products.
To avoid significant degradation, the device power-on hours (POH) must be limited to the following:
Table 4-1. Recommended Power-On Hours
Speed Grade
Operating Junction
Temperature (Tj)
Nominal CVDD Voltage (V)
Power-On Hours [POH]
(hours)
375 MHz
375 MHz
0 to 90 °C
-40 to 105 °C
1.2V
1.2V
100,000
75,000 ⁽¹⁾
456 MHz
0 to 90 °C
1.3V
100,000
456 MHz
-40 to 90 °C
1.3V
100,000
(1) 100,000 POH can be achieved at this temperature condition if the device operation is limited to 345 MHz.
Note: Logic functions and parameter values are not assured out of the range specified in the recommended
operating conditions.
The above notations cannot be deemed a warranty or deemed to extend or modify the warranty under
TI’s standard terms and conditions for TI semiconductor products.
36
Device Operating Conditions
Submit Documentation Feedback
Product Folder Links: AM1705
Copyright © 2010–2013, Texas Instruments Incorporated