AM1705DPTPA3 Datasheet, PDF (16/164 Pages) Texas Instruments – AM1705 ARM Microprocessor

AM1705
SPRS657D – FEBRUARY 2010 – REVISED MARCH 2013
www.ti.com
2.6.3 External Memory Interface A (ASYNC)
Table 2-5. External Memory Interface A (EMIFA) Terminal Functions
SIGNAL NAME
PIN
NO
PTP
TYPE⁽¹⁾ PULL⁽²⁾
MUXED
DESCRIPTION
EMA_D[7]/MMCSD_DAT[7]/GP0[7]/BOOT[13]
54
I/O
IPU
MMC/SD, GPIO,
BOOT
EMA_D[6]/MMCSD_DAT[6]/GP0[6]
52
I/O
IPU
EMA_D[5]/MMCSD_DAT[5]/GP0[5]
51
I/O
IPU
EMA_D[4]/MMCSD_DAT[4]/GP0[4]
EMA_D[3]/MMCSD_DAT[3]/GP0[3]
49
I/O
48
I/O
IPU
MMC/SD, GPIO EMIFA data bus
IPU
EMA_D[2]/MMCSD_DAT[2]/GP0[2]
46
I/O
IPU
EMA_D[1]/MMCSD_DAT[1]/GP0[1]
45
I/O
IPU
EMA_D[0]/MMCSD_DAT[0]/GP0[0]/BOOT[12]
44
I/O
IPU
MMC/SD, GPIO,
BOOT
EMA_A[12]/GP1[12]
42
O
IPU
EMA_A[11]/ GP1[11]
41
O
IPU
EMA_A[10]/GP1[10]
27
O
IPU
EMA_A[9]/GP1[9]
40
O
IPU
EMA_A[8]/GP1[8]
EMA_A[7]/GP1[7]
39
O
37
O
IPU
GPIO
IPD
EMIFA address bus
EMA_A[6]/GP1[6]
36
O
IPD
EMA_A[5]/GP1[5]
35
O
IPD
EMA_A[4]/GP1[4]
34
O
IPD
EMA_A[3]/GP1[3]
32
O
IPD
EMA_A[2]/MMCSD_CMD/GP1[2]
EMA_A[1]/MMCSD_CLK/GP1[1]
31
O
30
O
IPU
MMCSD, GPIO
IPU
EMIFA address bus
EMA_A[0]/GP1[0]
EMA_BA[1]/GP1[13]
EMA_BA[0]/GP1[14]
29
O
26
O
25
O
IPD
GPIO
IPU
IPU GPIO
EMIFA bank address
EMA_CS[3] /GP2[6]
EMA_CS[2]/GP2[5]/BOOT[15]
21
O
23
O
IPU GPIO
IPU GPIO, BOOT
EMIFA Async Chip
Select
EMA_OE /AXR0[13]/GP2[7]
22
O
IPU McASP0, GPIO EMIFA output enable
EMA_WAIT[0]/ GP2[10]
19
I
IPU GPIO
EMIFA wait
input/interrupt
(1) I = Input, O = Output, I/O = Bidirectional, Z = High impedance, PWR = Supply voltage, GND = Ground, A = Analog signal.
Note: The pin type shown refers to the input, output or high-impedance state of the pin function when configured as the the signal name
highlighted in bold. All multiplexed signals may enter a high-impedance state when the configured function is input-only or the configured
function supports high-Z operation. All GPIO signals can be used as input or output. For multiplexed pins where functions have different
types (i.e., input versus output), the table reflects the pin function direction for that particular peripheral.
(2) IPD = Internal Pulldown resistor, IPU = Internal Pullup resistor
16
Device Overview
Submit Documentation Feedback
Product Folder Links: AM1705
Copyright © 2010–2013, Texas Instruments Incorporated