DS583 Datasheet, PDF (1/15 Pages) Xilinx, Inc – System ACE Microprocessor Interface

DS583 December 2, 2009
XPS SYSACE (System ACE)
Interface Controller (v1.01a)
Product Specification
Introduction
The XPS System ACE Interface Controller (or,
interchangeably, the XPS SYSACE) is the interface
between the Processor Local Bus (PLB) and the
Microprocessor Interface (MPU) of the System ACE^™
Compact Flash solution peripheral. This module
attaches to the PLB.
Features
• Connects as a 32-bit slave on PLB V4.6 buses,
which are 32, 64 or 128 bit wide
• The XPS SYSACE is used in conjunction with a
System ACE Compact Flash Solution to provide a
System ACE memory solution
• System ACE Microprocessor Interface (MPU)
♦ Read/Write from or to a Compact Flash device
♦ Supports both 8-bit and 16-bit data bus access
modes
LogiCORE™ IP Facts
Core Specifics
Supported Device
Family
Spartan^®-3A/3A DSP, Spartan-3,
Spartan-3E, Automotive
Spartan 3/3E/3A/3A DSP, Spartan-6,
Virtex^®-4 /4Q/4QV, Virtex-5/5FX,
Virtex-6/6CX
Resources Used
See Table 7, Table 8, Table 9, Table 10, and Table 11.
Provided with Core
Documentation
Product Specification
Design File Formats VHDL
Constraints File
N/A
Verification
N/A
Instantiation Template N/A
Design Tool Requirements
Xilinx Implementation
Tools
ISE® 11.4 or later
Verification
ModelSim PE/SE 6.4b or later
Simulation
ModelSim PE/SE 6.4b or later
Synthesis
XST
Support
Provided by Xilinx, Inc.
© 2007-2009 Xilinx, Inc. XILINX, the Xilinx logo, Virtex, Spartan, ISE and other designated brands included herein are trademarks of Xilinx in the United States and
other countries. The PowerPC name and logo are the registered trademarks of IBM Corp. and are used under license. All other trademarks are the property of their
respective owners.
DS583 December 2, 2009
www.xilinx.com
1
Product Specification