TMS320VC5507_14 Datasheet, PDF (94/137 Pages) Texas Instruments – Fixed-Point Digital Signal Processor

Electrical Specifications
CLKMEM
CEx†
BEx‡
DCAB
M22
M23
EMIF.A[13:0]
D[15:0]
SDA10
SDRAS
M34
M36
M35
M37
SDCAS
M32
M33
SDWE
† _{The chip enable that becomes active depends on the address being accessed.}
‡ _{All BE[1:0] signals are driven low (active) during reads. Byte manipulation of the read data is performed inside the EMIF. These signals remain}
active until the next access that is not an SDRAM read occurs.
Figure 5−11. SDRAM DCAB Command
94 SPRS244J
April 2004 − Revised January 2008